Lavina Onfloor EDCO Slim-fit Trapezoid Bush Hammer Roller 30S Tungsten Carbide Tips For Floor Preparation Coating Removal Expose Large Aggregate Stone Anti-Slip Finishes

Floor preparation is very important before you start grinding. adhesives and coatings securely bond to the floor surface. our bush hammer tools are ideal to thoroughly remove these resilient materials and prepare the surface properly

Creates a bush hammered profile perfect for high traction exterior surfaces,Creates anti-slip finish on granite and marble

High stock removal capacity and can remove rigid and brittle coatings

Quickly expose large aggregate

Working Speed under 1000 RPM. Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.

After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust

Related photos & Videos:

No MOQ requirement, welcome to place small orders to test our quality

Private label accepted

Delivery time: 1-2 weeks depends on orders

Shipping: DHL, FedEx, UPS, SF Express, Sea transportation

Payment options: Bank wire and Paypal

Company certificates (MIC & SGS):

Testimonials

1,

Hi John,

Thanks for your message. I plan to work more with you. Our business has grown and we really like the Rhombus and the PCD options. I will review new pricing and see about placing an order soon.

Best regards,

Philip

2,

Hi John,

Yes the redilock pcds worked good.

I am in the process of putting another order through.

Best Regards

Steve

3,

John,

I apologize for not getting back to you sooner, I finally had a chance to use the diamonds we purchased a while ago, they worked very well. I will be ordering more in the future

Jason

4,

Hi we are very happy with the diamonds we have tested them now and I’m wondering if you could set up a price for a complete set from roof concrete to Super floor finish

Tom

5,

Hi John,

I will make the web with the most common tools as the list you send to me earlier.

In stock I will have at first only 16# rhombus for different machines and of course different Redi-lock tools mostly for Peter

In my web I going to tell smal story from Peter finding you and other smal talkJ

What can I tell about your company is there some interesting detalj such as amount of tools you make or how long time you have produce this product. I allredy read your story at web.

Do you have som other company behaind or are you like family company....

My logo as enclousure

Best Regards

Tomas

6,

Hi John,

They worked very well. They removed the thick coating we haven’t been able to remove with the regular 10 seg diamonds.

I’ll be ordering more diamonds soon.

Thank you

Josh

7,

Yes we have John and they seem to work great. No complaints. I will recommend your product to others and will be ordering more in the future.

Thanks.

Derek

8, dear John, thank you, all well received and working perfectly, we'll order more in the future. at the moment I am in Canada and will be back next week. best regards, Guido

9,

John,

We are using the diamonds I bought from you on a job now. So far they cut really good and there is plenty of diamonds in the metal.

I will give this info to a great friend of mine as we wear this set of tooling out,

He is a huge contractor compared to me, I am a small company.

He had previously bought a set directly from China before me, not sure of the company though. He did not like the ones he bought. He said they cut great at 1st but soon as they wore down into the metal there was no diamonds left in the metal. So they were worthless at that point. If yours continue to perform as they are now I’ll do my best to get him to purchase from you also.

Merry Christmas. Jesse

How do y’all celebrate Christmas in China? Or do you?

10,

Good morning John

We have tested de diamonds yet and there are very good! We contanct you, when we need again.

Have a nice time!

Greats from switzerland!

Lukas

11,

The PCD and diamond portion of the plates work very well and we are very

satisfied with the quality, thanks Dan

12,

Hi John,

yes last week the goods have arrived, we have also already tried the first tools TOP!, we are in the first week of December all the tools then try on a slightly larger area times, and when everything was great! is with the tools where I'm going times of. Then we will build an additional distribution channel so that in the coming year, and we ourselves will then only work with this tool.

Then I would say: a good cooperation in the future!

13,

Rodney:

Do Not Buy UnLeSS- You want to save Costs on Your Diamonds, And Diamonds Seem to Last way Longer.

I ONLY buy my metals from John. Single bar, double buttons and No Barred PCDS.

GET THIS —> Supper abrasives PCD’s when I used theirs, they would break teeth even on small job, Johns... I have bought 42 No Barred PCDs and done about four good sized epoxy removal jobs and still have all their teeth. I run two 30’’ propane powered lavinas and one 20’’ electric lavina.

Caution- You will be very happy.

Thanks for asking

Randy

14,

Hi John

We did 14000 sqft area with 4 coats of epoxy. Your diamonds cut right through and still look new.

Thanks my friend

15,

Hi John, Yes the tools turned up today and we are really impressed !! They are exactly what we wanted. I will be putting another order in hopefully tomorrow for some prep tools.

Hi John, I have transferred the money across to your account, it should be there in the next couple of hours. We tried some of the tools you sent today and they were really good many thanks.

Hi John, Parcels turned up this morning , really pleased with the tools I will be in touch soon with another order . Many thanks ! Cheers, Jon

Hi John, Not to worry I know your doing your best just let us know when your sending the order. Still really happy with the results we get with your tooling , tried the Frankfurt 60 grits yesterday and they were great : ) ! Cheers, Jon

Hi John,

Really impressed with the aluminium backing pads and the HTC tools fit beautifully !!

Hi John, Everything you sent works really well, still very impressed with the tooling and your customer service. I will be in touch once we have got through the work we are currently doing.

Hi John, we have used the 100 grit hybrids wet so far not dry , they do work very well ! Cheers

Hi John, Just spoke to a guy asking for a reference. I have spoken highly of you and he is going to order some tools from you . Kind regards, Jon

Hi John, I had a talk with a guy today and have passed on your details. He is involved with prep and is interested in tooling. Kind regards, Jon...

I am passing your details onto a big prep company tomorrow. They have lots of HTC machines and some Werkmaster. I have discussed your tooling with them and have said how happy with you we are in regards to quality and delivery. They are also interested in the 3" brazed tools.

I will let them have your e-mail address so they can contact you directly, please send them your tooling list and prices. I have explained to them your payment method.

Hi John, We have nearly broken up for our Christmas break and will be returning to work in middle of January.

All going well here hope all is well with you, have a good break as well.

By the way those 3" brazed diamonds work great !!

Hi John, The STI 2 pin tool holders are great! Perfect.

Once we get through the work we have at the moment i will be in touch.

Kind regards,Jon..